Controllino HMI with Modbus
Intro Information: In this tutorial we are using the HMI from Beijer. Controllino HMIs are industrial HMI panels with high-resolution touch-screens and modern design. The panels combine
Intro Information: In this tutorial we are using the HMI from Beijer. Controllino HMIs are industrial HMI panels with high-resolution touch-screens and modern design. The panels combine
Intro More information about port manipulation on this site: https://www.arduino.cc/en/Reference/PortManipulation Port registers allow for lower-level and faster manipulation of the i/o pins of the microcontroller on
Intro The terminal “12V/24V” and “GND” on the upper side of the CONTROLLINO terminals are for the supply voltage connection. You can supply the CONTROLLINO
The CONTROLLINO PLC MAXI and MEGA have also an Ethernet connector. It is marked with the sign “ETH”. This connector can be connected with a
Over the pinheader connector you can contact “directly” to the microcontroller. Theses contacts are like on the ARDUINO board at a 5V level. You can
CONTROLLINO can be reset over the “RST“ button. The RST-LED will be active if the RST button will be pressed and will be active as
Inputs (A0 … Ax) CONTROLLINO has many analog inputs that can be used an analog and digital input. This will be set in the user
Intro The CONTROLLINO PLC has „High-Side Switch“ outputs, „Half-Bridge“ outputs (only MEGA) and potential free Relays outputs. Some of these outputs are also capable of
The LED with the “OVL” marking show you a thermal overload of the CONTROLLINO PLC. At the CONTROLLINO MINI there are 2 temperature sensors integrated.
The CONTROLLINO MAXI and MEGA have a RS485 interface of the type SN65HVD08. With this interface you are able to communicate with other RS485 interfaces.
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.