Interrupts
Intro Interrupts are useful for automatically executing things in microcontroller programs and can solve timing problems. Good tasks for using an interrupt may include reading
Intro Interrupts are useful for automatically executing things in microcontroller programs and can solve timing problems. Good tasks for using an interrupt may include reading
Intro The LiquidCrystal library allows you to control LCD displays that are compatible with the Hitachi HD44780 driver. These are the LCDs that are usually connected over a
The LED with the “OVL” marking show you a thermal overload of the CONTROLLINO PLC. At the CONTROLLINO MINI there are 2 temperature sensors integrated.
The CONTROLLINO MAXI and MEGA have a RS485 interface of the type SN65HVD08. With this interface you are able to communicate with other RS485 interfaces.
Intro Every CONTROLLINO has a built-in RTC of the type RV-2123-C2-TA-QC-020 with buffered power supply. The RTC also runs without external power supply for about
Intro This example shows you how to read analog input from your Controllino device over serial communication. In order to do this, you have to
Intro This example shows you how to use our powerful digital outputs and relays. The CONTROLLINO PLCs have “High-Side Switch” outputs, “Half-Bridge” outputs (only MEGA)
Intro If you have a CONTROLLINO MINI device you can use the relay outputs “D0” to “D5” to connect and switch external circuits. The contact
Intro This example shows you how to connect 1-wire temperature sensor to the Controllino device and read the temperature or address of the sensor on the
Intro The terminal “12V/24V” and “GND” on the upper side of the CONTROLLINO terminals are for the supply voltage connection. You can supply the CONTROLLINO
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.