Enable D20-D23 Pins (MEGA)
Intro Controllino MEGA has 24 High Side digital outputs available. The first 20 outputs we can control using the standard Arduino functions (e.g. digitalWrite and
Intro Controllino MEGA has 24 High Side digital outputs available. The first 20 outputs we can control using the standard Arduino functions (e.g. digitalWrite and
Intro The LiquidCrystal library allows you to control LCD displays that are compatible with the Hitachi HD44780 driver. These are the LCDs that are usually connected over a
Intro This example shows you how to use our powerful digital outputs and relays. The CONTROLLINO PLCs have “High-Side Switch” outputs, “Half-Bridge” outputs (only MEGA)
Intro If you have a CONTROLLINO MINI device you can use the relay outputs “D0” to “D5” to connect and switch external circuits. The contact
Intro This example shows you how to connect 1-wire temperature sensor to the Controllino device and read the temperature or address of the sensor on the
Intro The terminal “12V/24V” and “GND” on the upper side of the CONTROLLINO terminals are for the supply voltage connection. You can supply the CONTROLLINO
The CONTROLLINO PLC MAXI and MEGA have also an Ethernet connector. It is marked with the sign “ETH”. This connector can be connected with a
Over the pinheader connector you can contact “directly” to the microcontroller. Theses contacts are like on the ARDUINO board at a 5V level. You can
CONTROLLINO can be reset over the “RST“ button. The RST-LED will be active if the RST button will be pressed and will be active as
Inputs (A0 … Ax) CONTROLLINO has many analog inputs that can be used an analog and digital input. This will be set in the user
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.