Category: MINI

Controllino HMI with Modbus

Intro Information: In this tutorial we are using the HMI from Beijer. Controllino HMIs are industrial HMI panels with high-resolution touch-screens and modern design. The panels combine

Read More »

Port Manipulation

Intro More information about port manipulation on this site: https://www.arduino.cc/en/Reference/PortManipulation Port registers allow for lower-level and faster manipulation of the i/o pins of the microcontroller on

Read More »

Interrupts

Intro Interrupts are useful for automatically executing things in microcontroller programs and can solve timing problems. Good tasks for using an interrupt may include reading

Read More »

Using a 16×2 LCD

Intro The LiquidCrystal library allows you to control LCD displays that are compatible with the Hitachi HD44780 driver. These are the LCDs that are usually connected over a

Read More »

RTC (Real Time Clock)

Intro Every CONTROLLINO has a built-in RTC of the type RV-2123-C2-TA-QC-020 with buffered power supply. The RTC also runs without external power supply for about

Read More »

Analog Read Serial

Intro This example shows you how to read analog input from your Controllino device over serial communication. In order to do this, you have to

Read More »

Digital & Relay Blink

Intro This example shows you how to use our powerful digital outputs and relays. The CONTROLLINO PLCs have “High-Side Switch” outputs, “Half-Bridge” outputs (only MEGA)

Read More »

Disconnect Relays

Intro If you have a CONTROLLINO MINI device you can use the relay outputs “D0” to “D5” to connect and switch external circuits. The contact

Read More »