CONTROLLINO can be reset over the “RST“ button.
The RST-LED will be active if the RST button will be pressed and will be active as long as the button is pressed. After releasing the button, the LED goes off and the user program will be executed from the beginning. The reset button is on the top of the CONTROLLINO and can be pressed with a thin screw driver. Don’t use to much force when pressing the button.
Introduction This tutorial explains how to implement an automatic water reserve control system using a CONTROLLINO PLC and OpenPLC. The system monitors the water levels
Introduction This tutorial demonstrates how to create an automatic staircase lighting system using OpenPLC and a CONTROLLINO PLC. The system uses two push buttons for
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.