Disconnect Relays
Intro If you have a CONTROLLINO MINI device you can use the relay outputs “D0” to “D5” to connect and switch external circuits. The contact
Intro If you have a CONTROLLINO MINI device you can use the relay outputs “D0” to “D5” to connect and switch external circuits. The contact
Intro This example shows you how to connect 1-wire temperature sensor to the Controllino device and read the temperature or address of the sensor on the
Intro The terminal “12V/24V” and “GND” on the upper side of the CONTROLLINO terminals are for the supply voltage connection. You can supply the CONTROLLINO
The CONTROLLINO PLC MAXI and MEGA have also an Ethernet connector. It is marked with the sign “ETH”. This connector can be connected with a
Over the pinheader connector you can contact “directly” to the microcontroller. Theses contacts are like on the ARDUINO board at a 5V level. You can
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.