RST Button and LED
CONTROLLINO can be reset over the “RST“ button. The RST-LED will be active if the RST button will be pressed and will be active as
CONTROLLINO can be reset over the “RST“ button. The RST-LED will be active if the RST button will be pressed and will be active as
This switch is made for switching the internal RTC (Real Time Clock) onto the SPI bus. If you use the RTC in you program, the
Intro The CONTROLLINO PLC has „High-Side Switch“ outputs, „Half-Bridge“ outputs (only MEGA) and potential free Relays outputs. Some of these outputs are also capable of
The LED with the “OVL” marking show you a thermal overload of the CONTROLLINO PLC. At the CONTROLLINO MINI there are 2 temperature sensors integrated.
The CONTROLLINO MAXI and MEGA have a RS485 interface of the type SN65HVD08. With this interface you are able to communicate with other RS485 interfaces.
Intro Every CONTROLLINO has a built-in RTC of the type RV-2123-C2-TA-QC-020 with buffered power supply. The RTC also runs without external power supply for about
Intro This example shows you how to read analog input from your Controllino device over serial communication. In order to do this, you have to
Intro This example shows you how to use our powerful digital outputs and relays. The CONTROLLINO PLCs have “High-Side Switch” outputs, “Half-Bridge” outputs (only MEGA)
Intro The CONTROLLINO PLCs MAXI and MEGA have an RS485 interface type SN65HVD08, which allows it to communicate with other RS485 devices. The RS485 is
Intro If you have a CONTROLLINO MINI device you can use the relay outputs “D0” to “D5” to connect and switch external circuits. The contact
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.