RST Button and LED

Categories: , , ,

CONTROLLINO can be reset over the “RST“ button.

The RST-LED will be active if the RST button will be pressed and will be active as long as the button is pressed. After releasing the button, the LED goes off and the user program will be executed from the beginning. The reset button is on the top of the CONTROLLINO and can be pressed with a thin screw driver. Don’t use to much force when pressing the button.

Share This Post

More Tutorials to explore

HTTP Web Client

Introduction Welcome to the “HTTP Web Client” tutorial using the CONTROLLINO MICRO. In this tutorial, we will learn how to create a web client that

Scan for I2C Devices

Introduction The I2C (Inter-Integrated Circuit) protocol is a popular means of communication between various sensors and devices. In this tutorial, we will learn how to