Board & Library Setup in Arduino IDE
General requirements CONTROLLINO library CONTROLLINO boards hardware definition
General requirements CONTROLLINO library CONTROLLINO boards hardware definition
Intro This example shows you how to connect 1-wire temperature sensor to the Controllino device and read the temperature or address of the sensor on the
Intro The terminal “12V/24V” and “GND” on the upper side of the CONTROLLINO terminals are for the supply voltage connection. You can supply the CONTROLLINO
Over the USB port you connect the CONTROLLINO PLC with the computer (USB cable Type A-B). Don’t use to much force when connecting! The main
The CONTROLLINO PLC MAXI and MEGA have also an Ethernet connector. It is marked with the sign “ETH”. This connector can be connected with a
Over the pinheader connector you can contact “directly” to the microcontroller. Theses contacts are like on the ARDUINO board at a 5V level. You can
CONTROLLINO can be reset over the “RST“ button. The RST-LED will be active if the RST button will be pressed and will be active as
This switch is made for switching the internal RTC (Real Time Clock) onto the SPI bus. If you use the RTC in you program, the
Inputs (A0 … Ax) CONTROLLINO has many analog inputs that can be used an analog and digital input. This will be set in the user
Intro The CONTROLLINO PLC has „High-Side Switch“ outputs, „Half-Bridge“ outputs (only MEGA) and potential free Relays outputs. Some of these outputs are also capable of
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.