USB Connector
Over the USB port you connect the CONTROLLINO PLC with the computer (USB cable Type A-B). Don’t use to much force when connecting! The main
Over the USB port you connect the CONTROLLINO PLC with the computer (USB cable Type A-B). Don’t use to much force when connecting! The main
The CONTROLLINO PLC MAXI and MEGA have also an Ethernet connector. It is marked with the sign “ETH”. This connector can be connected with a
Over the pinheader connector you can contact “directly” to the microcontroller. Theses contacts are like on the ARDUINO board at a 5V level. You can
CONTROLLINO can be reset over the “RST“ button. The RST-LED will be active if the RST button will be pressed and will be active as
This switch is made for switching the internal RTC (Real Time Clock) onto the SPI bus. If you use the RTC in you program, the
Inputs (A0 … Ax) CONTROLLINO has many analog inputs that can be used an analog and digital input. This will be set in the user
Intro The CONTROLLINO PLC has „High-Side Switch“ outputs, „Half-Bridge“ outputs (only MEGA) and potential free Relays outputs. Some of these outputs are also capable of
The LED with the “OVL” marking show you a thermal overload of the CONTROLLINO PLC. At the CONTROLLINO MINI there are 2 temperature sensors integrated.
The CONTROLLINO MAXI and MEGA have a RS485 interface of the type SN65HVD08. With this interface you are able to communicate with other RS485 interfaces.
Intro Every CONTROLLINO has a built-in RTC of the type RV-2123-C2-TA-QC-020 with buffered power supply. The RTC also runs without external power supply for about